|
|
Post by broncocraigellis on Jan 24, 2005 0:19:58 GMT -5
Chip, haven't heard from you in a while. Hope you haven't fallen off the face of the Earth. i had to dip out early Sat. night.
|
|
|
|
Post by jeepchipjones on Jan 24, 2005 13:26:06 GMT -5
School man, it blows... Im about to start working on my Jeep soon though, fixing everything on it so I can sell it. Let me know if you know where I can get any of this stuff local:
pass. side knuckle
brake line assembly
caliper bolts (2) w/ sleeves
rear shock for 6" lift
steering stabilizer thatll work with my tie rod or drag link
I also have to throw in that carrier and spider gears in the rear, tack weld the u-joint on the rear driveshaft (keeps slipping out and causing vibes), and find 2 tires for the front b/c mine are worn out bad. The header has a crack in it as well, but its Borla, so I can get that replaced for free, just have to install it, which is no fun. I dont really have a lot of free time to do all this stuff, but Ill have to squeeze it in somewhere. Anyways, holla at me later. Let me know how the Broncos doing!
|
|
|
|
Post by Busted Knuckle Racing on Jan 24, 2005 13:31:40 GMT -5
Peay's has a couple XJ's that I assume would have the knuckle and calipers you need... might want to check to make sure it will work though.
|
|
|
|
Post by broncocraigellis on Jan 24, 2005 23:48:07 GMT -5
i think the jeep in booneville where donald got his tranny should have the axle parts you need and an aftermarket stabilizer b/c it has a lift on it. don't know about the shock. check e-bay or jeepsunlimited, something like that.
i'll put bronco updates in the angry bronco thread
|
|
