|
|
Post by possum398 on Jul 21, 2004 13:39:57 GMT -5
Well the bolt pattern is different on the D44. It has a 6 bolt pattern. I can buy some 6 bolt rims and have two different bolt rims. I can also have the axles and rotors drilled out to match my other. What to do? If I get the rims I will have to buy 4 so they match. There is a Machine shop in Eupora that will machine the axles for $100 to $200. Both ways I am out of some money!
|
|
|
|
Post by Busted Knuckle Racing on Jul 21, 2004 15:59:33 GMT -5
I guess that would be kinda up to you....
I would do the one that takes the least amount of time so you can get those 4.10's under you...lol
Hey, by the way, I know Chip has offered to help you on Sunday and I will be in town too.... Let me know when you start on that bad boy....
|
|
|
|
Post by possum398 on Jul 22, 2004 1:51:42 GMT -5
Well I now have to work on Sat. So I am going to try to go home and get the axle and bring it here. Oh Chip, those adapters cost $245. I think I am going to take the axles to a machine shop in Eupora.
|
|
