|
|
Post by Wolfy317 on Aug 27, 2007 9:55:36 GMT -5
Anyone know if there is an easy way to adapt the standard CJ bolt pattern to a 6 lug 135mm bolt pattern...it would spice up my CJ King Ranch Project. I figured you guys where the ones to ask!  Of course I guess the thing I need to figure out is whether or not the hub will fit.......I'll have to research. |
|
|
|
Post by Busted Knuckle Racing on Aug 27, 2007 10:18:47 GMT -5
is 6 on 135mm the same as 6 on 5.5"?
|
|
|
|
Post by Wolfy317 on Aug 27, 2007 10:42:38 GMT -5
I'm not sure about that.....I did finally find some 2 piece adapters that will change 5 bolt to 6 bolt, but haven't found that pattern yet. Just using a conversion from mm to inches.....135mm comes in at 5.3 roughly....sooo....I'm guessing not.
|
|
|
|
Post by Busted Knuckle Racing on Aug 27, 2007 12:11:47 GMT -5
yeah, I don't think you will find any aftermarket adapters that pattern unless it's custom.
You can change your front to 6 on 5.5 by using dana 44 knuckles and spindles and hubs I believe, but the rear would have to be redrilled or swapped. That is why I was asking if 135mm was the same as a 5.5" pattern. what has a 6 on 135mm pattern? I know the newer ford 8 lug stuff is a metric pattern but I'm not familiar with anything metric in 6 lug.
|
|
|
|
Post by Wolfy317 on Aug 27, 2007 12:13:19 GMT -5
It's the F-150 King ranch from 04-07 I believe. Since I'm trying to do a King ranch Jeep setup, It would've been nice to be able to drop some of the rims on as well, but if it's not doable it's not, would make a nice touch though  |
|
|
|
Post by Wolfy317 on Aug 27, 2007 13:41:08 GMT -5
Just Thought I'd let everyone know that the guys at Skulte Performance designs told me that they could do this with no problem, so for anyone interested in doing some adapting in the future, their website is www.skulte.com |
|
