|
|
Ram-Rod
Jan 23, 2013 22:37:20 GMT -5
Post by dan99tj1 on Jan 23, 2013 22:37:20 GMT -5
I need some advice on the cross bars for the B pillars, I don't really like how they look in the pic, any suggestions? I know Pirate4X4 would say more triangulation but i think they look out of place in this pic, Maybe pull them closer to the B pillar on the bottom to match the rear down bars. Attachments:
|
|
|
|
Post by dan99tj1 on Feb 3, 2013 1:26:12 GMT -5
Front pic of the X in between the B pillars Attachments:
|
|
|
|
Post by dan99tj1 on Feb 3, 2013 1:30:21 GMT -5
Hope that wasnt anything I needed, I am really starting to wonder why I just didn't go full tube to begin with instead of keeping some of the frame. Attachments:
|
|
|
|
Post by dan99tj1 on Feb 3, 2013 1:32:53 GMT -5
Pic of the rear where it sits as of now, still have a good bit of welding to do. Attachments:
|
|
|
|
Ram-Rod
Feb 9, 2013 10:09:58 GMT -5
Post by dan99tj1 on Feb 9, 2013 10:09:58 GMT -5
X for the B pillar Attachments:
|
|
|
|
Ram-Rod
Feb 9, 2013 10:12:39 GMT -5
Post by dan99tj1 on Feb 9, 2013 10:12:39 GMT -5
Start of the dovertail, I'm going to do a little more cutting to the comp cut to make it more of a circle instead of a straight line, just had to start somewhere . BTW body work doesn't come natural to me! Attachments:
|
|
|
|
Ram-Rod
Feb 17, 2013 22:32:49 GMT -5
Post by dan99tj1 on Feb 17, 2013 22:32:49 GMT -5
Rear end motivation, I'm holding out on making mounts for the coils in hopes of finding some air shocks for the rear soon, but now that I'm looking I dont see any at a descent price that I can afford! Attachments:
|
|
|
|
Ram-Rod
Feb 17, 2013 22:33:55 GMT -5
Post by dan99tj1 on Feb 17, 2013 22:33:55 GMT -5
A start to what will end up being the dash. Attachments:
|
|
|
|
Ram-Rod
Apr 11, 2013 9:24:24 GMT -5
Post by jharfst on Apr 11, 2013 9:24:24 GMT -5
Looking good so far. Plans for drivetrain?
-jim
|
|
|
|
Ram-Rod
Apr 11, 2013 15:34:12 GMT -5
Post by dan99tj1 on Apr 11, 2013 15:34:12 GMT -5
Plans right now are for a ford DT, mainly because I already have it and its a drivers drop 60. I ordered a set of 16" fox air shocks yesterday and got everything welded up so far and the body back on over the weekend. Our computer crashed so I can't upload recent pics.
|
|
|
|
Ram-Rod
Aug 3, 2013 10:40:01 GMT -5
Post by dan99tj1 on Aug 3, 2013 10:40:01 GMT -5
Bare fare frame Attachments:
|
|
|
|
Ram-Rod
Aug 3, 2013 10:47:30 GMT -5
Post by dan99tj1 on Aug 3, 2013 10:47:30 GMT -5
going over Attachments:
|
|
|
|
Ram-Rod
Aug 3, 2013 10:57:49 GMT -5
Post by dan99tj1 on Aug 3, 2013 10:57:49 GMT -5
upside down for welding Attachments:
|
|
|
|
Ram-Rod
Aug 3, 2013 11:21:20 GMT -5
Post by dan99tj1 on Aug 3, 2013 11:21:20 GMT -5
Bare Chassis Attachments:
|
|
|
|
Ram-Rod
Aug 3, 2013 11:23:11 GMT -5
Post by dan99tj1 on Aug 3, 2013 11:23:11 GMT -5
Links have bushings on one side and 1.25" heims on the other Attachments:
|
|
